How to Fill Tires with Air

mechanic checking tire pressure
 

Whether you’re a first-time car owner or you’re taking on DIY service projects for the first time, you’re bound to have a lot of questions. Luckily, Sid Dillon Hyundai is here with a range of tips and tricks to help you maintain your vehicle. From teaching you how to jump-start a car to answering questions like, “How much air should I put in my tires?” our Lincoln team makes car ownership easy. Learn how to fill tires with air and more below!

 

 

Adding Air to Tires: Step-by-Step Guide

If you’ve never checked or adjusted your car’s tire pressure, don’t sweat it! Learning how to fill tires with air is simple. Change your car’s tire pressure through these steps:

  • Find an air dispenser at your local Crete gas station. 
  • Pull up close enough so the air hose can reach all four tires. 
  • Remove the cap from the valve on the first tire and put it somewhere safe. 
  • Use the tire gauge to check the air pressure on the first tire. Repeat for the remaining three. 
  • Attach the air hose and hold it for a few moments. Re-check your tire pressure. If you still need more air, alternate between filling and checking until you reach a sufficient car tire pressure. 
  • Be sure to slowly add air in order to avoid overfilling. 

It’s worth noting that the gauges at public gas stations aren’t always 100% reliable. This is due to the fact that driving causes your tires to expanse, thus increasing the tire pressure. 

If you add a bit too much air, don’t stress. You can easily release air from the tire while at the air pump. Simply flip the air dispenser over and find the small knob on the back. When pressed against your tire valve stem, you should be able to hear air being released. If you don’t get the car tire pressure exactly right the first time, don’t rush off. Take the time to make sure each tire is at a safe pressure before you head out on the Omaha streets. 

How Much Air Should I Put in My Tires? 

If you’re asking yourself, “How much air should I put in my tires?” start by checking for a sticker inside the driver’s door. This sticker has information about all of your tires. If you can’t find the sticker, review your owner’s manual. In most cases, passenger vehicles recommend 32 to 35 psi when the tire is cold. Check your tire pressure before heading out to get the most accurate reading. When adding air to your tires, keep the following tips in mind:

  • Don’t inflate your tires to the psi printed on the tire itself. This number represents the maximum pressure the tire can hold – not the recommended psi. 
  • If you feel like your vehicle is bouncing or your handling feels off, chances are you’ve overinflated your tires. 
  • Tires that are underinflated wear out faster.

Schedule Tire Service Near Seward! 

If you’re not sure how to maintain your tires, schedule an appointment with Sid Dillon Hyundai today! Our team can perform a quick inspection and get you back on the road in no time. 

 

More from Sid Dillon Hyundai

  • What Kind of Oil Does a Hyundai Elantra Take?

    Omaha and Seward drivers should know that changing your Hyundai Elantra oil is extremely important to the condition of your vehicle. If you choose to skip or prolong an oil change interval, your engine could suffer immense damage at a high cost. Most vehicles can have an oil change between 7,500 to 10,000 miles. Refer…

Sid Dillon Hyundai 40.7364343, -96.6867297.